Graco Airless Sprayer

Product Details:

The T-Max™ is a real solution for applying plasters, rather than just a spraying machine. The First Choice for Interior Plasters and Decorative Materials. The TexSpray T-MAX 506 has been specifically designed to apply most interior plasters and fillers.

Using the T-MAX 506 in combination with an external compressor and an air-assisted applicator allows you to spray decorative plasters with aggregates up to 1mm. Benefits•A very smooth finish: A lot less laying off, up to 30% savings possible compared to manual work•Up to 30 metre hose possible: Spray a complete villa without moving your sprayer or material.•Spray airless or air-assisted: Applies almost all plasters without a compressor. Spray decorative materials using an external compressor

• Graco’s finest in modular designs Modularity from your doorstep to a multitude of simultaneous jobsites, up and down floors, all the way to the heart of the pump on the jobsite. Graco’s brand new T-MAX provides you with an unseen modular and versatile design without any need for tools
• Small, Compact, and Manoeuvrable
  
  • Balanced design for easy rolling — even when full
  • Locking front swivel caster wheel
• Quick-Access Piston Pump
  
  • T-MAX pumps are designed to be taken apart in seconds to easily access any part of the pump
  • Most importantly, no tools are required
• Material Hopper
  
  • 65 litre hopper
  • Steep-sided design keeps material flowing
  • Option to install Graco’s Vibra-Flo system
  • Option to install Graco’s Bag Rollers
• Heavy-Duty Modular Frame
  
  • Steel construction withstands jobsite abuse
  • Easy, no-tools connect and disconnect
  • Small, compact and balanced design for easy manoeuvring
• The lance Quick and clean, opening/closing avoids spitting. The horizontal design generates optimal material passing, avoiding material clogs. Very light and extremely easy to handle
• Hose Extremely light and flexible. To tackle bigger jobs: the quick connecting camlock™ system allows you to safely extend hose length up to 30 metres by hand, without using extra tools. Allows complete spraying of a villa with two floors without moving your T-Max™.
• SMARTCONTROL™ 3.0• Delivers smooth, consistent material flow• Provides Airless or Flow mode• Display shows pressure, material consumption in litres/gallons, and more
• Tool Box
  
  • Built-In Storage compartment
  • Keep your nozzles, tips and other tools safe
• Material Scraper
  
  • Straight and curved edge allowing hopper cleaning as well as emptying material bucket fully

Product Details:

Property maintenance pros, remodelers and general contractors work smarter and faster with the ProX17. This innovative sprayer can tackle any interior, rental property and large home project. Replace the pump on the job with no tools and use longer hose lengths to be more productive.


Features:

• ProX Stainless Steel Piston Pump - For greater reliability and long life
• ProXChange Pump System - Eliminates downtime with quick, no-tools pump replacement on-the-job
• DC Motor - Supports longer extension cords and up to 150 feet of airless hose
• PushPrime - Fast and reliable start-up every time
• SG3 Metal Spray Gun - Premium spray gun with hose swivel making it easy to manage longer hose lengths
• TrueAirless Spray Tip with SoftSpray Technology - greater control and less overspray with a wide range of coatings
• Compact Design - Easy to transport around the job site
• Adjustable Pressure - Easy control of paint flow
• InstaClean Pump Filter - Extra filtration reduces tip clogging
• Power Flush - Connects to garden hose for fast and easy cleanup

Product Details:

This product must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with an appropriate grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Product Details:

High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.

•  Do not spray without tip guard and trigger guard installed.
•  Engage trigger lock when not spraying.
• Do not point gun at anyone or at any part of the body.
•  Do not put your hand over the spray tip.

Product Details:

Fluid from the gun/dispense valve, leaks, or ruptured components can splash in the eyes or on skin and cause serious injury.

•  Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning, checking, or servicing equipment.
•  Tighten all fluid connections before operating the equipment.
•  Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.

Product Details:

Improper grounding, setup or usage of the system can cause electric shock.

• Turn off and disconnect power cord before servicing equipment.
• Wait 5 minutes after disconnecting from power source before servicing motor control.
• Use only grounded electrical outlets.
• Use only 3-wire extension cords.
• Ensure ground prongs are intact on sp

Product Details:

The GMAX II 3900 has the power and flow to handle up to two guns and is ideal for the professional contractor who sprays a wide variety of coatings.

Everyday Reliability. Graco GMAX gas-powered airless paint sprayers deliver unmatched durability and performance, with the capability to handle the widest range of tip sizes, longer hose lengths and heavier coatings with ease.

Product Details:

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:

•  Use equipment only in well ventilated area.
•  Do not fill fuel tank while engine is running or hot; shut off engine and let it cool. Fuel is flammable and can ignite or explode if spilled on hot surface.
•  When flammable liquid is sprayed or used for flushing or cleaning, keep sprayer at least 20 feet (6 m) away from explosive vapors.
•  Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths (potential static arc).
•  Keep work area free of debris, including solvent, rags and gasoline.
•  Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes are present.

Product Details:

You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:

•  Protective eyewear
•  Clothing and respirator as recommended by the fluid and solvent manufacturer
•  Gloves
•  Hearing protection

Product Details:

Pressurized Aluminum Parts Hazard:

Use of fluids that are incompatible with aluminum in pressurized equipment can cause serious chemical reaction and equipment rupture. Failure to follow this warning can result in death, serious injury, or property damage.

•  Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents.
•  Do not use chlorine bleach.
•  Many other fluids may contain chemicals that can react with aluminum. Contact your material supplier for compatibility.

Product Details:

This product must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with an appropriate grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.

•  Improper installation of the grounding plug is able to result in a risk of electric shock.
•  When repair or replacement of the cord or plug is required, do not connect the grounding wire to either flat blade terminal.
•  The wire with insulation having an outer surface that is green with or without yellow stripes is the grounding wire.
•  Check with a qualified electrician or serviceman when the grounding instructions are not completely understood, or when in doubt as to whether the product is properly grounded.
•  Do not modify the plug provided; if it does not fit the outlet, have the proper outlet installed by a qualified electrician