Product Details:
Brand | Jotun |
Packaging Type | Bucket |
Relative Humidity | 10 - 85 % |
Air Temperature | -5 to 40 Degree C |
Nozzle Tip | 19-25 Inch |
Pressure at Nozzle | 150 bar/2100 psi |
Substrate Temperature | -5 to 60 degree C |
This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids, high build product. This product is tintable in a wide range of colours in Jotun''s Multicolor Industry (MCI) system. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces. It can be applied at sub zero surface temperatures.
Product Details:
Standard quality
Rich color texture
Resistant to corrosion
Smooth finish
Take less time to get dried
Long lasting
Product Details:
Brand | Jotun |
Form | LIquid |
Flash Point | 35 Degree C |
Density | 1.5 kg/l |
Nozzle Tip | 19-25 Inch |
Pressure at Nozzle | 150 bar/2100 psi |
Packaging Size | 16-20 Ltr |
Substrate Temperature | -5 to 40 degree C |
This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids product. Specially designed for areas where optimum surface preparation is not possible or desired. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures.
Product Details:
Water proof
Easy to apply
Available in standard size of packaging
Provide shining look
Long shelf life
Color fastness
Product Details:
Brand | Jotun |
Flash Point | 33 Degree C |
Pot Life | 1.5 h |
Shelf Life | 24 months |
Substrate Temperature | 0 Degree C to 40 Degree C |
Packaging Size | 5 Ltr |
Density | 1.4 kg/l |
This is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids product. Specially designed for application with brush and roller. 1:1 mixing ratio for easy use and reduced wastage. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, concrete and a range of aged coating surfaces.
Product Details:
Rich color
Available in standard size of spool
Provide shiny and smooth look to the surface
Easily blend with surface
Cost-effective
Resistant to corrosion and rust